View CPH3104_121215.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:EN6004
PNP/NPN Silicon Epitaxial Planar Transistors
CPH3104/3204
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers, strobes.
Package Dimensions
unit:mm 2150
[CPH3104/3204]
2.9 0.4
0.6 0.2
Features
* Adoption of FBET and MBIT processes. * High current capacitance. * Low collector-to-emitter saturation voltage. * Ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). * High allowable power dissipation.
1 1.9 3
0.15
0 to 0.1
1.6 2.8
2
0.6
( ) : CPH3104
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2x0.8mm)
0.7 0.9
1 : Base 2 : Emitter 3 : Collector SANYO : CPH3
Conditions
0.2
Ratings (-)15 (-)15 (-)5 (-)1.5 (-)3 (-)200 0.9 150 -55 to +150
Unit V V V A A mA W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE1 hFE2 fT Cob VCB=(-)12V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)50mA VCE=(-)2V, IC=(-)800mA VCE=(-)2V, IC=(-)50mA VCB=(-)10V, f=1MHz 200 80 (300) 200 (15)10 MHz MHz pF Conditions Ratings min typ max (-)100 (-)100 560 Unit nA nA
Marking : CPH3104 : AD, CPH3204 : CD
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
40599 (KOTO) TA-1452 No.6004-1/4
CPH3104/3204
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol VCE(sat)1 VCE(sat)2 VBE(sat) Conditions IC=(-)5mA, IB=(-)0.5mA IC=(-)500mA, IB=(-)25mA IC=(-)500mA, IC=(-)25mA (-)15 (-)15 (-)5 Ratings min typ (-)10 (-)120 (-)0.9 max (-)25 (-)240 (-)1.2 Unit mV mV V V V V
V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IC=(-)10A, IC=0
-800 -700
I C - VCE
-7.0mA -6.0mA -5.0mA -4.0mA mA 3.0
-2.0mA
-8 .0m A
Collector Current, IC - mA
Collector Current, IC - mA
-600 -500 -400 -300
600 500
-
8.0
700
mA
CPH3104
800
I C - VCE
7.0mA 6.0mA 5.0mA 4.0mA 3.0mA
2.0mA
CPH3204
400
1.0mA
300 200 100
-1.0mA
-200 -100 0 0 -0.2 -0.4 -0.6 -0.8
IB=0
-1.0
0 0 0.2 0.4 0.6 0.8
IB=0
1.0
Collector-to-Emitter Voltage, VCE - V
-200 -180
Collector-to-Emitter Voltage, VCE - V
200 180
I C - VCE
-1.0 A -0.8m mA
I C - VCE
CPH3204
0.7mA 0.6mA
0.5mA
CPH3104
Collector Current, IC - mA
-140 -120 -100 -80 -60 -40 -20 0 0
-0.6mA
Collector Current, IC - mA
-160
160 140 120 100 80
0.4mA
-0.4mA
0.3mA
-0.2mA
0.2mA
60 40 20
0.1mA
IB=0
-1 -2 -3 -4 -5
0 0 1 2 3 4
IB=0
5
Collector-to-Emitter Voltage, VCE - V
-1000
Collector-to-Emitter Voltage, VCE - V
1000
I C - VBE
CPH3104 VCE=-2V
Collector Current, IC - mA
I C - VBE
CPH3204 VCE=2V
Collector Current, IC - mA
-800
800
-600
600
-200
Ta=75
200
0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2
0 0 0.2 0.4 0.6 0.8 1.0 1.2
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
Ta=75
-400
C 25C -25C
400
25C -25C
No.6004-2/4
CPH3104/3204
1000 7 5
hFE - I C
CPH3104 VCE=-2V
Ta=75C
1000 7 5
hFE - I C
CPH3204 VCE=2V Ta=75C 25C
DC Current Gain, hFE
DC Current Gain, hFE
3 2
25C -25C
3 2
-25C
100 7 5 3 2 3 5 7 -10 2 3 5 7 -100 2 3 5 7 -1000 2 3 5
100 7 5
3 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 2 3 5
Collector Current, IC - mA
-1000 7
Collector Current, IC - mA
CPH3104 IC/IB=20
1000 7 5 3 2 100 7 5 3 2 10 7 5
VCE(sat) - IC
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
VCE(sat) - IC
CPH3204 IC/IB=20
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
5 3 2 -100 7 5 3 2 -10 7 5
= Ta
C 75
25
C
-2
C 5
= Ta
C 75
5 C
C 25
-2
3
5
7 -10
2
3
5 7 -100
2
3
5 7 -1000
2
3
5
7 10
2
3
5
7 100
2
3
5
7 1000
2
Collector Current, IC - mA
-10 7
Collector Current, IC - mA CPH3104 IC/IB=20
10 7
VBE(sat) - IC
Base-to-Emitter Saturation Voltage, VBE(sat) - V
VBE(sat) - IC
CPH3204 IC/IB=20
Base-to-Emitter Saturation Voltage, VBE(sat) - V
5
5
3 2
3 2
-1.0 7 5 3 2 3 5 7 -10 2 3 5
Ta=-25C
75C
1.0 7 5 3
25C
Ta=-25C
75C
25C
7 -100
2
3
5
7 -1000
2
2
3
5
7 10
2
3
5
7 100
2
3
5
7 1000
2
Collector Current, IC - mA
100 7
Collector Current, IC - mA
1000
Cob - VCB
f=1MHz For PNP, minus sign is omitted.
fT - IC
VCE=2V For PNP, minus sign is omitted.
Gain Bandwidth Product, fT - MHz
7 5
Output Capacitance, Cob - pF
5
3 2
CPH
3 2
CP
H3
104
320 4
310
4
CPH
CPH
10 7 5 3 5 7 2 3
320
4
100 7 5 7 2 3 5 7 2 3 5 7 1000
1.0
5
7
10
2
10
100
Collector-to-Base Voltage, VCB - V
Collector Current, IC - mA No.6004-3/4
CPH3104/3204
ASO
5 3 2
PC - Ta
1.2
ICP IC
CPH3104/3204
10 0
Collector Current, IC - A
1.0 7 5 3 2 0.1 7 5 3 2 2
10 0m s DC op era tio
Collector Dissipation, PC - W
10
ms
1.0 0.9 0.8
s
s
50 0
M ou
nte
do
s 1m
na
n
ce
0.6
ram
ic
bo
ard
(6
0.4
00
CPH3104/3204 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2x0.8mm)
3 5 7 1.0 2 3 5 7 10 2 3
mm
2
x0
.8m
0.2
m)
0
0
20
40
60
80
100
120
140
160
Collector-to-Emitter Voltage, VCE - V
Ambient Temperature, Ta - C
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice.
PS No.6004-4/4

▲Up To Search▲

Price & Availability of CPH3104

	To Download CPH3104 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .